ADDSTONE Faux-Stone Coaging Spray gun spraying - Create high-simulated stone surfaces quickly and easily

 

Step:1 Clean flatten the surface

faux-stone-coating-project-1.jpg

  • Clean the wall surface, dirt, debris, and clean the wall surface, do not leave mud, dirt, grease, to avoid affecting the adhesion of the primer
  • Cut out the protrusions and metal objects

Sept:2 Flatten the surface

faux-stone-coating-project-2.jpg

  • Use the paste filler to level the wall so that the wall is not recessed and uneven
  • If the wall has cracks, broken corners, it needs to be filled with cement and remove the sludge.

Step:3 Apply protection material to all the areas not intended to be coated.

faux-stone-coating-project-3.jpg

Please cover the area that is not sprayed with protective material.

Step:4 Coat a primer coat

faux-stone-coating-project-4.jpg

  • Primer is the most important material to connect with the base surface. Choose the appropriate primer for different interfaces.
  • You can choose to roll or spray the primer on the wall
  • Primer:1 layer
  • Preparation: no water added
  • #1.5 nozzle
  • Drying Time: 2~3hr (Depending on climate, temperature and humidity will vary)

Step:5 Coat a elastic coat

faux-stone-coating-project-5.jpg

  • The function of the elastic coating is to increase the ductility and the saturation of the main material color.
  • You can choose to roll or spray the primer on the wall
  • Elastic:1 layer
  • Preparation: 5% of water
  • #1.5 nozzle
  • Drying Time: 2~3hr (Depending on climate, temperature and humidity will vary)

Step:6 Coat main material addstone 1~2 layers

faux-stone-coating-project-6.jpg

  • Highly simulated granite coatings let you create your own granite
  • Please spray the main material with air gun
  • ADDSTONE: 2 layers.
  • Please put the cap on the first layer. and take off cap on second layer.
  • Preparation: no water added
  • #2.5 nozzle
  • Drying Time: 3~4hr (Depending on climate, temperature and humidity will vary)

Step:7 Coat a sealer

faux-stone-coating-project-7.jpg

  • The main function of the topcoat is to protect the stone system.
  • Topcoat with self-cleaning, weather-assistant , water-assistant etc. feathers
  • You can choose to roll or spray the primer on the wall
  • Sealer:2 layer
  • Preparation: 50% of water
  • #1.5 nozzle
  • Drying Time: 2~3hr (Depending on climate, temperature and humidity will vary)

Finish: Solid Stone Texture

faux-stone-coating-project-8.jpg

Drying Time:Single coat at standard thinkness (28℃、50%RH)
  • Touch Dry: 2 hours
  • Hard Dry: 2 days

Construction Notes

  • Before spraying, it is necessary to clean the wall surface and remove the protrusions and fill the slits to ensure that the wall surface is clean .
  • During construction, the moisture content of the surface material should be below 10%, the pH value is below 10, and the temperature is above 5 °C.
  • Different primers are required depending on the surface material.
  • Please cover the area that is not sprayed with protective material.
  • Each layer must be sprayed after the previous layer has been sufficiently dried.
  • Do not apply in humid air or on rainy days.
  • Do not mix with any solvents or paint or water to avoid deterioration.
  • Do not stir with a high speed mixer.
  • The transportation and storage of materials should be safe, avoiding sunshine, high temperatures and contamination.

 

 

Click to see more construction details teaching

ADDSTONE Faux-Stone Coating

 

Construction problems, technical contacts

      

Pin It